Industrial Electrical Engg Company

Established since 1921

Glass Fibre Woven Or Glass Polyester Fibre Woven Tapes

GLASS FIBRE Tape made from yarn of continuous filament glass fibres (usually known as “E” glass) containing not more than 1 percent of alkali calculated as sodium oxide.

The Polyester yarn of continuous filament polyethylene terephthalate (PET) of heat set.

Tape is woven in plain weave selvedges. The selvedges is uniform and not calendered. The picks are interlocked at or near the selvedge opposite the one from which weft is inserted ; thus preventing unraveling of the selvedges during use. The tape is interlocked such a way that the thread will not pulled out of the body.

Tape is marked with centre line.

Tape conforming to the specification IS : 5352 (Part 1) 1999

The use of Glass Fibre Woven Tape In Transformers, Industrial Machines, Turbe Generators, Coils etc.

  1. Width available : 10 mm, 13 mm, 15 mm, 20 mm, 25 mm, 30 mm, 32 mm, 40 mm, 45 mm & 50 mm.
  2. Thickness : 0.08m, 0.13m, 0.18m, 0.23
  3. Length : 50 mtrs. Roll.
  4. Winding : The tape is wound on a hard tubular core of 10am to 13m Dia.
  5. Tensile Strength : 0.08m 30 N/mm² Min.
    0.13m 35 N/mm² Min.
    0.18m 45 N/mm² Min.
    0.23m 65 N/mm² Min.
  6. Construction: :
    1) Warp ends : thickness 0.13m 25 per CM.
    2) Picks : thickness 0.13 m 14 per CM.
  7. Having joints shall not be exceeded 20 percent.
  8. Effect of heat in air : loss in width ����� 5 percent
  9. Electrical conductivity of aqueous extract : ≤ 15 ms/ m.


  • No categories